L8X · CAPACITIVE TOUCH SWITCH

LANBON version

A clear touch. Your everyday light.

A tempered-glass panel with large capacitive touch areas. Choose one to four fixed lighting circuits, in white or black, with EU and US formats.

Choose your model Discuss a project

L8X-HS1-W · 86 × 86 mm · White

Decorative edge lighting

Automatic colours, a colour of your own, same-colour breathing or off. Separate from the front touch-button backlight.

Capacitive touch

Touch once to switch on, touch again to switch off. This panel has no LCD.

One to four circuits

Independent lighting switching, up to 200 W per circuit.

Three networking choices

Choose LANBON, Tuya Wi-Fi or Tuya zigbee using the shared selector.

BEFORE INSTALLATION

Match the circuit, load and wall box.

A qualified electrician must check the supply and installation. This model switches lighting on/off; it is not a dimmer, fan-speed or curtain controller.

01

Power and neutral

AC 100–250V · 50/60Hz · Neutral required

02

Lighting load

200 W per circuit; 200 W combined for this 1-gang hardware.

03

Wall-box depth

Greater than 38 mm usable depth; allow space for conductors and terminals.

04

Network

Follow setup requirements for the selected networking version.

GLASS TOUCH AREAS

A touch area for each lighting circuit.

Choose fixed one-, two-, three- or four-circuit hardware. The original product photos below follow the selected format, finish and circuit count.

Selected L8X-HS1-W; independent on/off lighting circuits, not dimming. Do not short or parallel outputs.

L8X · EDGE LIGHTING

A softer glow. Even at rest.

Let the panel edge breathe and change colour while idle, or choose a colour of your own. The decorative edge light is separate from the controlled lights or appliance.

Edge-lighting illustrationActual colour and brightness depend on the unit and surroundings.

L8X-HS1-W · EU · White — Edge-lighting illustrationActual colour and brightness depend on the unit and surroundings.

EXPLORE THE GLOW

Automatic breathing & colour changes

Let the edge light fade gently in and out as its colour changes. Automatic mode takes care of the colours for you.

Light when you want it.

These controls preview the edge-lighting effect on this page; they do not configure a switch. For the setup entry, follow the instructions for your selected networking version.

LANBON APP

Lighting control, from your phone.

The supplied LANBON circuit screen follows the selected hardware count. The timer screen is an example, not a live connection. Remote control needs internet and available services.

1-gangCircuit switchingSchedules

LANBON · L8X · WI-FI MESH

Switches form their own network.

Compatible L8X series switches share a network without a dedicated gateway. Configure the first switch near the router as the master, then configure the remaining switches.

Control through LANBON Smart Living. Remote features still require a router, internet and available services. Switch Mesh does not extend Wi-Fi for phones or computers.

YOUR PANEL CONFIGURATION

The same configuration, from every angle.

L8X-HS1-W · 86 × 86 mm · White front — 01Front

L8X-HS1-W · 86 × 86 mm · White angle — 02Angled view

L8X-HS1-W · 86 × 86 mm · White side — 03Side

L8X-HS1-W · 86 × 86 mm · White back — 04Rear

MODEL & INSTALLATION

Technical specifications

Confirm the exact installed model and its label.

Key specifications

Model: L8X-HS1-W
Panel dimensions: 86 × 86 mm
Power supply: AC 100–250V · 50/60Hz
Load per circuit: ≤200 W
Combined load: ≤200 W
Load types: LED, CFL, incandescent and fluorescent lighting; on/off only.
Wall-box depth: >38 mm
Terminal torque: 0.5 N·m

Shared enclosure dimension drawing; three-gang front shown as an example.

Download dimensions↓

The drawing shows a three-gang front as an enclosure example; panel size applies across the supplied circuit counts. The 32 mm drawing dimension does not establish a universally sufficient wall-box depth.

QUALIFIED INSTALLATION

Plan the wiring before fitting the panel.

Isolate the supply. A qualified electrician checks neutral, live and each lighting circuit.
Check the actual wall-box depth, mounting points, conductor space and exact model label.
Use matching current wiring instructions. Never short or parallel the switched outputs.
Fit the panel securely before restoring power. Confirm current firmware and power-restoration behavior with support.

Ask about installation

DEVICE & APP EXAMPLES

See the everyday controls.

Touch-switch demonstration

Supplied demonstration, not a live connection or a load/response-time measurement. The example configuration may differ from the selected model.

LANBON App demonstration