Three speeds
Low, medium and high for compatible single-phase AC fans.
L8X · CAPACITIVE TOUCH FAN CONTROL
LANBON versionThree speeds. A touch of comfort.
A glass touch panel for one compatible AC fan. Move between low, medium and high speed with the upper and lower touch areas. EU or US format, in white or black.
L8X-HF-W · 86 × 86 mm · White
≤200 W
One fan motor per controller; no parallel motors or light output.
Glass touch panel
Green key backlighting, using the supplied appearance. No LCD.
Three network versions
LANBON, Tuya Wi-Fi or Tuya zigbee with the shared selector.
BEFORE INSTALLATION
Start with the right fan motor.
For compatible single-phase AC fan motors, including traditional PSC ceiling-fan motors. Confirm the exact motor/controller combination with a qualified electrician.
Power and neutral
AC 100–250V · 50/60Hz · Neutral required
Fan load
One AC fan, ≤200 W. Do not parallel multiple fan motors.
Excluded motors
No DC/inverter fans or fans with built-in remote receivers or smart speed controllers.
Wall-box space
Greater than 38 mm usable depth, plus conductor and terminal space.
Network
Follow setup requirements for the selected networking version.
THREE TOUCH AREAS
Speed up above. Slow down below.
Each touch of the upper area increases speed by one level; the lower area decreases it by one level. The centre area is the fan power control. These keys control one fan, not three separate outputs.
FAN COMPATIBILITY
Made for the motor you specify.
Suitable fan types include compatible traditional AC ceiling fans, exhaust fans and wall fans. Motor type and existing control electronics matter more than appearance.
Low · Medium · High
Three fixed speed levels. Actual airflow, noise and motor speed depend on the fan.
One motor only
Maximum 200 W for one compatible AC motor. Never combine multiple motors on the output.
Fan control only
No light switching or dimming output. A fan/light combination needs separate control of its lighting circuit.
Check the actual combination
Some AC motors can hum at low speed. Confirm starting and low-speed operation with the actual fan; do not test speed control without a connected motor.
LANBON APP
Fan control, within reach.
The supplied LANBON screens show three speed levels, on/off and a timer. Screens are examples, not a connected device; remote control needs internet and available services. This model does not support energy monitoring.
LANBON · L8X · WI-FI MESH
Switches form their own network.
Compatible L8X series switches share a network without a dedicated gateway. Configure the first switch near the router as the master, then configure the remaining switches.
Control through LANBON Smart Living. Remote features still require a router, internet and available services. Switch Mesh does not extend Wi-Fi for phones or computers.
YOUR PANEL CONFIGURATION
The same fan control, from every angle.
MODEL & INSTALLATION
Technical specifications
Match the exact installed model and its label.
Key specifications
- Model
- L8X-HF-W
- Panel dimensions
- 86 × 86 mm
- Power supply
- AC 100–250V · 50/60Hz
- Neutral wire
- Required
- Fan output
- One AC fan motor
- Lighting output
- Not supported
- Wall-box depth
- >38 mm
- Terminal torque
- 0.5 N·m
- Panel material
- Tempered glass
- Housing material
- Flame-retardant PC
- Connectivity version
- LANBON version
- Connection
- Smart Living app · Switch Wi-Fi Mesh
- Operating temperature
- -25 °C – +60 °C
- Humidity
- ≤95% RH
- Fan maximum
- ≤200 W
- Speed levels
- 3 · low / medium / high
- Motor type
- Compatible single-phase AC / PSC
- Custom speed presets
- Not supported
- Energy monitoring
- Not supported
- Key backlight
- Green
- Conductor range
- 24–12 AWG
- Protection
- IP20
- App
- Smart Living
The front drawing is an enclosure example, not the selected fan-key layout. Its 32 mm dimension does not establish a universally sufficient wall-box depth. Confirm the current firmware power-restoration behavior with support.
QUALIFIED INSTALLATION
Check the motor and wiring together.
- Isolate the supply. A qualified electrician checks live, neutral and the single fan output.
- Confirm a compatible single-phase AC fan motor, no more than 200 W. Do not connect DC fans, smart/remote-controlled fans or multiple motors.
- Use current wiring instructions for the exact installed model. Confirm the motor capacitor and starting conditions with support; do not remove motor components based on a generic diagram.
- Allow greater than 38 mm usable wall-box depth plus wiring space. Secure the panel before restoring power and verify low, medium and high operation.
DEVICE & APP EXAMPLES
See the supplied controls in use.
Fan-speed operation illustration
Supplied animated illustration, not filmed hardware or a measured airflow/noise test. Key colour follows the green product photos on this page.
LANBON App demonstration
Supplied LANBON App example, not a live connection.
DOCUMENTS & SUPPORT
Documents for your panel format.
For exact-model wiring and operating instructions, motor compatibility, current firmware behavior, certification and destination supply, contact support.
Get model-specific support