Trailing-edge dimming
For compatible dimmable LEDs and resistive lamps.
L7 · TOUCH DIMMER
LANBON versionSet the light for the moment.
A glass touch dimmer for one compatible lighting circuit, up to 100 W. Adjust the light from the panel or app.
L7-HD-W · 85 × 85 mm · White
≤100 W
Total load on one lighting circuit.
Touch and app
Adjust brightness on the panel or in the app.
Zigbee
LANBON app · Zigbee network · Compatible host switch required; not Wi-Fi Mesh
BEFORE INSTALLATION
Match the dimmer to the lamp.
Check that the LED lamp or driver is marked dimmable and supports trailing-edge control. Compatible resistive incandescent and mains-voltage halogen lamps are also supported.
Power and neutral
AC 100–250V · 50/60Hz · Neutral required
Lighting load
Up to 100 W total. Avoid mixing lamp types or brands on the same circuit.
Excluded loads
Non-dimmable lamps, CFLs, smart bulbs, leading-edge-only drivers and motors.
Low brightness
Minimum stable brightness depends on the lamp or driver.
INTERACTIVE DIMMING
Try the dimmer on the wall.
Tap the top key to brighten and the bottom key to dim. Tap the centre key to switch the pendant off or restore the last brightness.
LANBON APP
Adjust brightness from your phone.
The L7dim screens show the brightness control and timer. Remote access requires the matching host switch and internet service.
LANBON L7 · WI-FI + ZIGBEE
A switch at the heart of your L7 network.
The LANBON version must be used with a LANBON L7 host switch. The host connects to your router through Wi-Fi; the other L7 switches connect to the host through Zigbee.
Wi-Fi router
Your network connection
Wi-Fi→Wireless connection only
Host appearance illustration
LANBON L7 host switch
A switch itself · Wi-Fi to router
Zigbee→L7 switch network
L7-HD dimmer
The dimmer connects to the host via Zigbee only.
Required: LANBON L7 host switchChoose the matching host model and project configuration before ordering. Ordinary L7 switches are not automatically host switches.
Network illustration, not electrical wiring. Host appearance is illustrative; use the actual supplied host model. Remote app access also requires internet and available services. Tuya Zigbee uses its compatible Tuya gateway instead.
PANEL GALLERY
View the selected panel from each side.
MODEL & INSTALLATION
Technical specifications
Specifications for the selected model.
Key specifications
- Model
- L7-HD-W
- Panel dimensions
- 85 × 85 mm
- Power supply
- AC 100–250V · 50/60Hz
- Neutral wire
- Required
- Dimming method
- Trailing edge (MOSFET)
- Lighting load
- One circuit · ≤100 W
- Panel material
- Tempered glass
- Wall-box depth
- >38 mm
- Housing material
- Flame-retardant PC
- Connectivity version
- LANBON version
- Connection
- LANBON app · Zigbee network · Compatible host switch required; not Wi-Fi Mesh
- App
- Smart Living
Allow additional space for wiring and terminals.
Check the exact lamp and wall box.
Ask support for the current installation instructions and confirm the lamp or driver before fitting the dimmer.
Ask about installation