Three touch keys
Open, pause and close from the panel, including when the host or gateway is offline.
L7 · SMART CURTAIN SWITCH
LANBON versionOpen. Pause. Close.
Three glass touch keys control one compatible AC curtain motor. Use the LANBON app to schedule movement or set an opening percentage.
L7-HC-W · 85 × 85 mm · White
≤200 W
One compatible AC curtain motor with direction interlock.
Travel time
Set full travel time from 1 to 256 seconds in the LANBON app.
Zigbee
LANBON app · Zigbee network · Compatible host switch required; not Wi-Fi Mesh
BEFORE INSTALLATION
Match the switch to the motor.
Have a qualified electrician confirm compatibility and the applicable installation instructions for the selected model.
Power and neutral
AC 100–250V · 50/60Hz · Neutral required
Motor
One compatible AC motor, up to 200 W. Physical end limits are provided by the motor.
Direction interlock
Open and close outputs are interlocked.
Wall box
Usable depth greater than 38 mm, with room for conductors and terminals.
TOUCH CONTROL
See the curtain move as you tap.
Top opens, centre pauses, bottom closes. Press the centre key during travel to stop the curtain in place.
L7-HC-W
TRAVEL SETTINGS
Set the full travel time in the app.
1–256 seconds
Set the time it takes the curtain to travel from end to end. The factory estimate is 30 seconds. Saving the setting triggers one closing movement.
Opening percentage
The LANBON app estimates the opening from the configured travel time. The wall panel provides open, pause and close. The motor determines the physical end limits.
LANBON APP
Choose an opening or set a schedule.
The original app screens show curtain control and scheduling. The opening percentage is estimated from travel time.
LANBON L7 · WI-FI + ZIGBEE
A switch at the heart of your L7 network.
The LANBON version must be used with a LANBON L7 host switch. The host connects to your router through Wi-Fi; the other L7 switches connect to the host through Zigbee.
Wi-Fi router
Your network connection
Wi-Fi→Wireless connection only
Host appearance illustration
LANBON L7 host switch
A switch itself · Wi-Fi to router
Zigbee→L7 switch network
L7-HC curtain switch
The curtain switch connects to the host via Zigbee.
Required: LANBON L7 host switchChoose the matching host model and project configuration before ordering. Ordinary L7 switches are not automatically host switches.
Network illustration, not electrical wiring. Host appearance is illustrative; use the actual supplied host model. Remote app access also requires internet and available services. Tuya Zigbee uses its compatible Tuya gateway instead.
PANEL GALLERY
View the selected panel from each side.
MODEL & INSTALLATION
Technical specifications
Specifications for the selected model.
Key specifications
- Model
- L7-HC-W
- Panel dimensions
- 85 × 85 mm
- Power supply
- AC 100–250V · 50/60Hz
- Neutral wire
- Required
- Motor load
- ≤200 W
- Motor count
- One compatible AC motor
- Direction interlock
- Supported
- Panel material
- Tempered glass
- Housing material
- Flame-retardant PC
- Connectivity version
- LANBON version
- Connection
- LANBON app · Zigbee network · Compatible host switch required; not Wi-Fi Mesh
- Ingress protection
- IP20
- App
- Smart Living
The dimensions drawing describes the enclosure. Check the separate wall-box drawing for usable installation depth.
Confirm installation with support.
Ask support for current model-specific wiring instructions. A qualified electrician should confirm the motor, wall box and circuit before installation.
Ask about installation