A physical, positive press
Press once for on, again for off. The illuminated symbols are button markings, not a screen.
L10R · RECTANGULAR-BUTTON SMART SWITCH
LANBON versionLong lines. A clear purpose.
Slender rectangular buttons pair illuminated symbols and text with a bright outlined edge. Choose Tech Grey or Gold, then match the physical 1–4-gang model to your project's lighting circuits.
L10R-HS1-T · EU · Tech Grey · 1-gang
Two considered finishes
Tech Grey and Gold share the same rectangular-button identity across 1–4-gang options.
Project symbols & text
Specify button symbols and text to match room names and lighting circuits.
BEFORE YOU SPECIFY
Specify the hardware, not just the look.
A qualified electrician must verify the wired circuits, lighting drivers and actual loads. This model switches lighting on/off; it does not dim lights or regulate fan speed.
Power & neutral
AC 100–250V · 50/60Hz · Live and neutral required
Selected hardware
L10R-HS1-T · 1-gang · Tech Grey
Lighting load
≤200 W per circuit, ≤200 W total. Never parallel outputs.
Wall box
32 mm device body; the drawing specifies depth >38 mm. Verify usable space for conductors and terminals.
Network
LANBON version uses the matching app and 2.4 GHz Wi-Fi setup. Remote services require internet.
FOUR PHYSICAL CIRCUIT COUNTS
One rectangular button for each lighting circuit.
Choose the physical 1-, 2-, 3- or 4-gang model for the wired circuits. The selected option is outlined below; change finish, format and circuit count in the common configuration band above.
Selected: L10R-HS1-T. Each button operates a separate lighting circuit within 200 W; not a software mode change.
APPEARANCE, IN THE DETAILS
Two finishes. One unmistakable design.
Long lines, a bright outline
A bright frame traces each rectangular physical button, with a symbol and readable text identifying its lighting circuit. Illustration shows the detail, not the current circuit count.
White or orange button light
Choose the button backlight using the rear hardware selector with power isolated. The three-gang examples show the two backlight settings, not panel colours, RGB edge effects or app colour control.
PROJECT SYMBOLS & TEXT
Make each button's purpose clear.
Specify symbols and text for fixed physical button markings, such as Living room, Bedroom or Kitchen. Confirm artwork and supply terms for the project. These are fixed physical markings, not editable screen icons; a pictogram does not add dimming, fan control or another electrical function.
Discuss button artwork
SMART LIVING
The same circuits, on your phone.
The supplied Smart Living circuit screen follows the selected physical gang count. The schedule screen is a two-circuit example, not a live connection. Remote use requires setup, internet and available services.
LANBON · L10R · WI-FI MESH
Switches form their own network.
Compatible L10R series switches share a network without a dedicated gateway. Configure the first switch near the router as the master, then configure the remaining switches.
Control through LANBON Smart Living. Remote features still require a router, internet and available services. Switch Mesh does not extend Wi-Fi for phones or computers.
YOUR SELECTED HARDWARE
L10R-HS1-T · Tech Grey
MODEL & INSTALLATION
Technical specifications
L10R-HS1-T · EU · Tech Grey · 1-gang
Key specifications
- Rated voltage
- AC 100–250V · 50/60Hz
- Load per circuit
- ≤200 W
- Combined load
- ≤200 W
- Wiring
- Live + neutral required · screw terminals
- Wall-box depth
- >38 mm; verify conductor/terminal space
- Installation depth
- 32 mm
- Suitable wire size
- 24–12 AWG
- Tightening torque
- 0.5 N·m
- Minimum load
- No minimum specified in the load matrix
- Power restoration
- Confirm current firmware behaviour before specifying
- Panel size
- 86 × 86 mm
- Panel finish
- Tech Grey
- Panel material
- Flame-retardant PC
- Housing material
- Flame-retardant PC
- Weight
- 0.3 kg
- Package dimensions
- 102.6 × 141 × 52 mm
- Connectivity version
- LANBON version
- Connection
- Smart Living app · Switch Wi-Fi Mesh
- Wireless standard
- 2.4 GHz Wi-Fi · IEEE 802.11 b/g/n
- Frequency range
- 2.412–2.472 GHz
- Operating temperature
- −25 °C – +60 °C
- Relative humidity
- <95% RH
- Model
- L10R-HS1-T
- Lighting circuits
- 1-gang
- Button backlight
- White / orange · rear hardware selector
- Button artwork
- Project symbol & text enquiries
- Energy monitoring
- Not supported
- Protection rating
- IP20
- App
- Smart Living
- Receiver sensitivity
- −97 dBm
All four physical circuit counts and both finishes share the shown dimensions for this format. Body depth is not a minimum usable box-depth guarantee. Ask support for current terminal instructions and the model-specific certification scope.
Designed for lighting on/off.
Compatible LED, CFL, incandescent and fluorescent lighting within the stated limits. Not for dimming, water pumps, unsuitable high-power inductive loads or overloaded circuits. Separate outputs must never be shorted or paralleled. Verify actual driver and inrush characteristics before specifying.
A precise specification. A professional installation.
- Isolate power. Confirm the physical model, live/neutral supply, circuit count and usable wall-box space.
- Obtain current wiring instructions for the exact model. Identify terminals and keep the lighting outputs separate.
- Set rear backlight hardware only with power isolated. Secure the wiring and base, then click the panel firmly into place.
- Inspect before restoring power. Refitted buttons may take up to one minute to respond; follow the installation instructions.
BUTTON & APP EXAMPLES
See the controls in use.
Tech Grey three-gang illustration
Supplied room illustration, not the currently selected hardware or a measured switching-response test.
Smart Living two-circuit example
Supplied LANBON app recording, not Smart Life or the currently selected physical circuit count.
PROJECT DOCUMENTATION
Documents matched to your format.
Contact support for current model-specific wiring and operating instructions, power-restoration behaviour, certification scope and project artwork/supply terms.
Project & channel enquiries